HIKVISION DS-K1T320MFWX User Manual

The device will restore to the default sengs, except for the device IP address and the user
informaon.
Restore All
All parameters will be restored to the factory sengs. You should acvate the device before
usage.
Unlink
Tap Conguraon → System → Maintenance .
Tap Unlink to unlink the app.
Aer unlinking APP account, you cannot operate via APP.
8.4.7 Security Sengs
You can set the SSH and HTTP according to actual needs.
Tap Conguraon → System → Security , to enter the sengs page.
Check Enable to enable SSH.
Check Enable to enable HTTP.
8.4.8 Network Sengs
You can set the port and Wi-Fi parameters.
Set Wi-Fi Parameters
Set the Wi-Fi parameters for device wireless connecon.
Steps
Note
The
funcon should be supported by the device.
1.
T
ap Conguraon → Network → Basic Sengs → Wi-Fi to enter the sengs page.
2.
Check Enable Wi-Fi.
DS-K1T320 Series Face
Recoginon Terminal User Manual
56

HIKVISION DS-K1T320MFWX Specifications

General

Operating system installed	Linux
Display diagonal	2.4 \
Display resolution	320 x 240 pixels
Display technology	LCD
Camera resolution (numeric)	2 MP
USB port	Yes
Ethernet LAN (RJ-45) ports	1
Face capacity	500
Housing color	Black
Cards capacity	1000 cards
Event capacity	100000
Languages support	Multi
Authentication modes	Multiple
Face recognition accuracy	99 %
Face recognition distance	0.3 - 1.5 m
Face recognition duration	0.2 s
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	0 - 90 %
Power consumption (typical)	6 W
Type	Face recognition terminal