HIKVISION DS-K1T320MFWX User Manual

1) Set the IP address, subnet mask, and gateway. Or enable DHCP and the system will allocate
the IP addr
ess, subnet mask, and gateway automacally.
2) Set the DNS parameters. You can enable Auto Obtain DNS, set the preferred DNS server and
the alternate DNS server.
3) Tap Save.
Set Port Parameters
You can set the HTTP, RTSP, HTTPS, and Server according to actual needs when accessing the device
via ne
twork.
Tap Conguraon → Ne
twork → Basic Sengs → Port , to enter the seng page.
HTTP
It refers to the port through which the browser accesses the device. For example, when the
HTTP Port is modied to 81, you need to enter hp://192.0.0.65:81 in the browser for login.
RTSP
It refers to the port of real-me streaming protocol.
DS-K1T320 Series Face
Recoginon Terminal User Manual
59

HIKVISION DS-K1T320MFWX Specifications

General

Operating system installed	Linux
Display diagonal	2.4 \
Display resolution	320 x 240 pixels
Display technology	LCD
Camera resolution (numeric)	2 MP
USB port	Yes
Ethernet LAN (RJ-45) ports	1
Face capacity	500
Housing color	Black
Cards capacity	1000 cards
Event capacity	100000
Languages support	Multi
Authentication modes	Multiple
Face recognition accuracy	99 %
Face recognition distance	0.3 - 1.5 m
Face recognition duration	0.2 s
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	0 - 90 %
Power consumption (typical)	6 W
Type	Face recognition terminal