Access Control Terminal·Quick Start Guide
11
5 Activating the Access Control
Terminal
Purpose:
You are required to activate the terminal first before using
it.
Activation via SADP, and Activation via client software are
supported.
The default values of the control terminal are as follows.
The default IP address: 192.0.0.64.
The default port No.: 8000.
The default user name: admin.
5.1 Activating via SADP Software
SADP software is used for detecting the online device,
activating the device, and resetting the password.
Get the SADP software from the supplied disk or the
official website, and install the SADP according to the
prompts. Follow the steps to activate the control panel.
Steps:
1. Run the SADP software to search the online devices.
2. Check the device status from the device list, and select
an inactive device.
To Next Page
Loading...
Need help?
General
