Access Control Terminal·User Manual
52
You can set the center group for uploading the log via the EHome protocol.
Steps:
1. Click Network -> Report Strategy.
2. Select a Center Group from the drop-down list.
3. Check the Enable check box.
4. Set the uploading method.
You can set the main channel and the backup channel.
5. Click Settings on the right of the channel field to set the detailed information.
6. Click Save to save the settings.
Configuring Advanced Network
Click Network -> Advanced Settings. You can configure the DNS address 1, the DNS address 2, the
alarm host IP and the alarm host port. Click Save to save the settings.
Configuring Zone Parameters
Step:
1. Click Alarm -> Zone to enter the Zone interface.
To Next Page
Loading...
