Access Control Terminal·User Manual
54
1. In the Remote Configuration interface, click Other -> Access Control Parameters.
2. Select and check the Downstream RS-485 Communication Backup checkbox or the Press Key
to Input Card No. checkbox.
3. Click Save to save the settings.
Uploading Background Picture
Click Other -> Picture Upload. Click to select the picture from the local. You can also click Live
View to preview the picture. Click Picture Upload to upload the picture.
Configuring Face Detection Parameters
Click Other -> Face Detection. You can check the Enable checkbox to enable the device face
detection function.
Note: Only devices with video function support this function.
Operating Zone
Steps:
1. Click Operation -> Zone.
To Next Page
Loading...
Need help?
General
