HIKVISION DS-KH6320-LE1B

Figure 3-5 Create a Noce
4. Edit the noce on the right panel.
1) Click ... on the Send To eld to pop up the Select Resident dialog.
2) Check the checkbox(es) to select the resident(s). Or you can check the All
checkbox to select all the added residents.
3) Click OK to save the selecon.
4) Enter the subject on the Subject eld.
Note
Up to 63 characters are allowed in the Subject eld.
5)
Click
in the Type eld to unfold the drop-down list and select the noce type.
6)
Oponal: Click View to add a local picture to the noce.
Network Indoor
Staon Operaon Guide
16