EasyManuals Logo

HIKVISION DS-KH8350-TE1 User Manual

HIKVISION DS-KH8350-TE1
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
2.
Press a zone to pop up the zone eding dialogue box.
3.
Set the zone type, alarm type, status of arming status, entering delay, and exing delay.
4.
Tap OK to save the sengs.
Note
7 zone types are selectable: Panic Buon, Door Magnec, Smoke Detector, Acve Infrared,
Passive Infrared, Gas Detector, and Doorbell.
3 alarm types are selectable: 24h Alarm, Instant Alarm, and Delay Alarm.
Set the alarm type as 24h alarm, and the zone will be armed for 24h.
Set the alarm type as instant alarm, and the zone will alarm once it's triggered.
Set the alarm type as delay alarm, and you should set the entering delay
duraon and exing
delay duraon.
Both the entering delay
duraon and the exing delay duraon are from 30s to 60s.
For Gas Detector, Smoke Detector and doorbell, the alarm type is set as default 24h alarm.
The alarm type of them can not be changed.
Arming Mode Sengs
4 arming modes can be congured: stay mode, away mode, sleeping mode and custom mode.
Before You Start
Tap Sengs → Shortcut Sengs to enable Alarm.
Steps
Note
On the home page, the arming status funcon and zone sengs funcon are hidden by default.
You should enable the alarm funcon rst.
1.
Back to the home page, tap Sengs → Scene Sengs to enter the arming mode sengs
page.
2.
Tap Stay Mode, Away Mode, Sleeping Mode, or Custom to enter the page.
Network Indoor Staon Conguraon Guide
24

Other manuals for HIKVISION DS-KH8350-TE1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-KH8350-TE1 and is the answer not in the manual?

HIKVISION DS-KH8350-TE1 Specifications

General IconGeneral
ColorYes
CertificationFCC, IC, CE, C-TICK, REACH, WEEE, UL, CB, RCM
Connectivity technologyWired
Sustainability certificatesRoHS
Number of displays supported-
Voice codecsG.711u
Compatible memory cardsMicroSD (TransFlash)
Maximum memory card size32 GB
Power consumption200 mA
Indoor unit power typeDC
Power consumption (typical)7 W
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Display diagonal7 \
Touchscreen typeCapacitive
Display resolution1024 x 600 pixels
Display technologyIPS
Proper useIndoor
Product colorBlack, Grey
Placement supportedHorizontal
Package weight786 g
Outdoor unit includedNo
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100 Mbit/s
Ethernet interface typeFast Ethernet
Ethernet LAN (RJ-45) ports1
Supported network protocolsTCP/IP, SIP, RTSP
Weight and Dimensions IconWeight and Dimensions
Depth22.4 mm
Width180 mm
Height140 mm
Weight600 g

Related product manuals