HIKVISION DS-MDS003 - Upload File to Platform; Connect to Platform

DS-MDS003 Dock Station User Manual
UM DS-MDS003 042721NA 14
3.3.5. Upload File to Platform
You can upload file to platform.
Before You Start
• Connect to the platform server. Refer to “Connect to Platform” for details.
• The software communicates normally with the platform server.
Steps
1. Search file.
2. Upload file to platform.
• Upload Single File
1) Select a file to play.
2) Select Upload to upload it to platform.
• Upload Files in Batch
1) Select Upload in Batch to upload all the searched files to platform.
Result
Uploaded files will be marked as “Platform Uploaded” in the list.
3.4. Connect to Platform
Set platform parameters before uploading the collected files to platform.
Before You Start
• Allocate the platform server.
• The software communicates normally with the platform server.
Steps
1. Select Configuration.
2. Enter admin password, and select OK.
NOTE: Every time you enter the Configuration page, you must enter the correct admin password to
get the permission. Hereinafter it will not be illustrated any more.
3. Select Platform.
4. Select Platform Type.
5. Enter platform parameters, including IP Address, Port No., User Name, and Password.