DS-MDS003 Dock Station User Manual
UM DS-MDS003 042721NA 22
Chapter 5 System Configuration
5.1. View Basic Information
You can view basic information such as dock station no., host version no., APP version no., etc.
Steps
1. Go to Configuration → Basic.
2. View basic information, including Dock Station no., Host Version no., APP Version no., etc.
5.2. Set Language
You can select the system language.
Steps
1. Go to Configuration → Basic.
2. Select Language.
3. Select OK.
5.3. Set Debug Mode
You can set USB flash disk mode or debug mode.
Steps
1. Go to Configuration → Basic.
2. Select Debug Mode.
• USB Flash Disk Mode: Only in this mode can the dock station collect files normally.
• Debug Mode: This mode is for the software developer to debug the dock station. It is not
recommended for normal operator use.
3. Select OK.
5.4. Set Collection Format
You can select the collection format of video, audio, and picture.
Steps
1. Go to Configuration → Basic.
2. Select Video, Audio, or Picture to edit the collection format.
• : Add new format. Enter the format in the text field, and select Save.
To Next Page
Loading...