HIKVISION DS-MDS003 - Restore System to Factory Settings

DS-MDS003 Dock Station User Manual
UM DS-MDS003 042721NA 26
2. Select OK of Restore Host Parameters.
3. Select OK in the pop-up window.
Result
The host parameters are restored to the default settings.
6.5. Restore System to Factory Settings
NOTE: You can restore the Android system to the factory settings.
Operate this function with care.
Steps
1. Go to Configuration → Basic.
2. Select OK of Restore System to Factory Settings.
3. Select OK in the pop-up window.
Result
The Android system is restored to factory settings.