HIKVISION DS-PDEB1-EG2-WB(B) User Manual

100
Cellular Data Network
Set the cellular network parameters if you insert a SIM card inside the device. By using the cellular
network, the device can upload alarm notifications to the alarm center.
Before You Start
Insert a SIM card into the device SIM card slot.
Steps
5. Click Configuration → Network → Network Configuration → Cellular Data Network to enter
the page.
Figure 5-28. Cellular Data Network
6. Enable the function.
7. Set the cellular data network parameters.
Dialing Number
Enter the operator dialing number.
Note
Only the private network SIM card user needs to enter the dialing number.
User Name
Ask the network carrier and enter the user name.
Password

HIKVISION DS-PDEB1-EG2-WB(B) Specifications

General

Brand	HIKVISION
Model	DS-PDEB1-EG2-WB(B)
Category	Security System
Language	English