HIKVISION DS-PDEB1-EG2-WB(B) User Manual

107
The device will push notifications when any peripheral status is changed.
Panel Operation
The device will push notifications when the user operate the control panel.
Smart Alarm Event
The device will push notifications when alarm is triggered in network cameras(using
HIKVISION protocol).
PIRCAM Gif
The video and pictures generated by PIR cameras will be uploaded to the alarm receiving
center.
Video Clips
The video and pictures generated by network cameras will be uploaded to the alarm
receiving center.
4. Click Save.
APP
Steps
1. Click Configuration → Alarm Communication → Event Notification → APP.
2. You need to set if it is important alarm. Refer to Alarm Receiving Center for detailed event
description.
Important Alarm
When the APP is in silent mode, the push items set as important alarm will still play the
corresponding voice prompts. Fire, medical, and panic alarms are configured as important
alarms by default.
ARC Disconnection Report Delay
The device will push notifications when Alarm Receiving Center is disconnected.
Note
This configuration item is valid only when ARC is configured as ISUP protocol.
Figure 5-33. APP(Notification)

HIKVISION DS-PDEB1-EG2-WB(B) Specifications

General

Brand	HIKVISION
Model	DS-PDEB1-EG2-WB(B)
Category	Security System
Language	English