77
3. Select Preferred FTP or Alternated FTP, and enable FTP.
4. Configure the FTP parameters
Protocol Type
FTP and SFTP are selectable. The files uploading is encrypted by using SFTP protocol.
Server Address & Port
The FTP server address and corresponding port.
User Name & Password/Enable Anonymity
The FTP user should have the permission to upload pictures. If the FTP server supports
picture uploading by anonymous users, you can enable anonymous to hide your device
information during uploading.
Directory Structure
The saving path of snapshots in the FTP server.
4. Tap Save.
NAT
Universal Plug and Play (UPnP™) is a networking architecture that provides compatibility among
networking equipment, software and other hardware devices. The UPnP protocol allows devices
to connect seamlessly and to simplify the implementation of networks in the home and corporate
environments.
Enable the UPnP function, and you don’t need to configure the port mapping for each port, and
the device is connected to the Wide Area Network via the router.
Steps
1. In the site, tap the AX PRO and then log in to the device (if required).
2. Tap → Communication Parameters→ NAT to enter the page.
3. Drag the slider to Enable UPnP.
4. Optional: Select the mapping type as Manual to set the HTTP port and the service port.
5. Click Save to complete the settings
Intercom Service
You can configure the Intercom service for an intercom sounder.
Before You Start
You should enroll an intercom sounder first.
Only one sounder can be set as the intercom sounder.
Steps
1. Tap → Communication Parameters→ Intercom Service to enter the page.
2. Slide to enable the function.
3. Set intercom type.
SIP
To Next Page
Loading...
Need help?
General
