19
Locking User Settings
The device will be locked 90 s after 3 failed credential attempts (can be set in Retry Time before
Auto-Lock) in a minute.
You can view the locked user or unlock a user and set the user locked duration.
Note
To compliant the EN requirement, the system will only record the same log 3 times continuously.
Steps
1. Click System → System Security → User Lockout Attempts to enter the Locking User Settings
page.
2. Set the following parameters.
Retry Times before Auto-Lock
If the user continuously input the incorrect password for more than the configured times, the
account will be locked.
To Next Page
Loading...
