Need help?Do you have a question about the HIKVISION DS-19A08-F/Kx and is the answer not in the manual?
General| Model | DS-19A08-F/Kx |
|---|---|
| Type | Control Panel |
| Alarm Inputs | 8 |
| Alarm Outputs | 4 |
| RS-485 | 1 |
| Power Supply | 12 V DC |
| Input Voltage | 12 V DC |
| Power Consumption | ≤5 W |
| Operating Temperature | -10 °C to +55 °C |
| Material | Plastic |
| Category | Alarm Control Panel |
| Operating Humidity | 10% to 90% (non-condensing) |
| Installation | Wall Mount |
Provides a general overview of the control panel and its core capabilities.
Details the key hardware and software features, including zones, partitioning, and event logs.
Illustrates and describes the main components and connectors on the control panel's main board.
Explains the procedures for wiring various devices, such as detectors and keypads, to the control panel.
Guides users through the initial steps of powering on and starting up the control panel system.
Details how to configure various alarm keypad settings, including installer and operator parameters.
Lists and explains the operation codes used for controlling the control panel via the keypad.
Demonstrates how to interpret system status indicators on the keypad display for various operational states.
Provides step-by-step instructions for installing the iVMS-4200 client software on a computer.
Guides users through registering a super user and logging into the iVMS-4200 software.
Explains how to configure basic network and device parameters for the control panel using the client software.
Details how to remotely configure device parameters, including system information and network settings.
Explains the function of the Project button for navigating abnormal interface displays.
Addresses common problems related to network connectivity, client login, and center communication.
To Next Page
