Control Panel User Manual
103
Steps:
1. Select the user type. Operator and installer can be selected.
2. Select the index number of the keypad user, up to 16 numbers can be
selected.
3. Enter the name of the keypad operator.
4. Enter the password of the operator.
5. Click the dropdown menu to select the user permission.
6. Click Apply to save the settings.
4.4.3 Network Configuration
Purpose:
You can edit the general network parameters in this section.
General Network Parameters Configuration
Steps:
1. Enter the general network configuration page.
Remote Configuration-> Network->General
To Next Page
Loading...
Need help?
General
