HIKVISION DS-19A08-F/Kx - Whitelist Parameters Configuration

Control Panel User Manual
63
Non-zone Alarm
Report Programming
Address
Non-zone Alarm
Report Programming
Address
630
Center Group 5
Non-zone Alarm
Report Programming
Address
634
Center Group 6
Non-zone Alarm
Report Programming
Address
{2} Soft Zone Report
{3} System Status Report
{4} Alarm Clearing Report
{5} Testing Report
{6} Arming Report
{7} Disarming Report
{8} Control Panel Hijack Reportage
{9} Alarm Recovery Report
{10} Bypass Report
{11} Bypass Recovery Report
{2}～{11}Set the value as 1 to send the report. Set the value as 0 not to
send the report.
Command
Command
Description
Command
Command
Description
0
Not Sending
1
Sending
{12} End the command.
3.1.28 Whitelist Parameters Configuration
Non-zone Alarm Report Configuration
To configure the non-zone alarm report, please refer to the command below.
680 00 0 0 0 0 0 0 0 0 0 0 0 #
1
2 4 63 5
87
9
10
11 12
13 14