HIKVISION DS-19A08-F/Kx - Control Panel Tampering Alarm Configuration; Testing Report Configuration

Control Panel User Manual
47
510 00 0 #
1
2
3
4
{1} The programming command address of emergency alarm linkage
setting is: 510;
{2} Partition Number, 00 indicate the global keypad, 01~08 indicate
partitions No.1~No.8;
{3} Whether to link the siren or not;
Command
Description
Command
Description
0
Not link the Siren
1
Link the Siren
{4} End the command.
3.1.22 Control Panel Tampering Alarm Configuration
The programming command of control panel tampering alarm settings is
shown below:
511 0 #
1
2 3
{1} The programming command address of control panel tampering
alarm is: 511;
{2} whether to link the siren or not;
Command
Description
Command
Description
0
Not link the Siren
1
Link the Siren
{3} End the command.
3.1.23 Testing Report Configuration
The testing report is used to validate the communication of control panel and