EasyManuals Logo
Home>HIKVISION>Control Panel>DS-19A08-F/Kx

HIKVISION DS-19A08-F/Kx User Manual

HIKVISION DS-19A08-F/Kx
157 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #104 background imageLoading...
Page #104 background image
Control Panel User Manual
104
2. Configure the NIC settings, including the IPv4(IPv6) Address, IPv4(IPv6)
Subnet Mask and IPv4(IPv6) Default Gateway.
3. Click Apply to save the above settings.
The valid value range of Maximum Transmission Unit (MTU) is 500 ~ 9676.
The default value is 1500.
The Multicast sends a stream to the multicast group address and allows
multiple clients to acquire the stream at the same time by requesting a copy
from the multicast group address.
Before utilizing this function, you have to enable the Multicast function of
your router and configure the gateway of the control panel.
DDNS Configuration
Purpose:
If your control panel is set to use PPPoE as its default network connection, you
can use the Dynamic DDNS for network access.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-19A08-F/Kx and is the answer not in the manual?

HIKVISION DS-19A08-F/Kx Specifications

General IconGeneral
BrandHIKVISION
ModelDS-19A08-F/Kx
CategoryControl Panel
LanguageEnglish

Related product manuals