Need help?Do you have a question about the HIKVISION KH6 Series and is the answer not in the manual?
General| Model | KH6 Series |
|---|---|
| Category | Control Panel |
| Operation System | Embedded Linux |
| Screen Size | 7 inch |
| Display Resolution | 1024 x 600 |
| Video Compression | H.264 |
| Audio Compression | G.711 |
| Audio Input | Built-in microphone |
| Audio Output | Built-in speaker |
| Network Interface | 10/100 Mbps Ethernet |
| Wi-Fi | 802.11 b/g/n |
| RS-485 | 1 |
| Alarm Output | 2 channels |
| TF Card | Supports up to 128GB |
| Input Voltage | 12 VDC |
| Power Supply | 12 VDC |
| Working Temperature | -10 °C to 55 °C (14 °F to 131 °F) |
| Working Humidity | 10% to 90% |
| Installation | Wall mounting |
| Communication Interface | Ethernet, Wi-Fi, RS-485 |
Indicates a hazardous situation that could result in death or serious injury.
Guides through the initial activation process via language and password setup.
Explains how to activate the indoor station using the iVMS-4200 client software.
Describes the wizard-based quick setup after device activation.
Covers essential settings for indoor station operation.
Details how to configure network settings like IP address and subnet mask.
Guides on connecting the indoor station to a Wi-Fi network.
Explains how to set network parameters for linked devices.
Details how to configure SIP protocol for device communication.
Instructions for adding external cameras to the indoor station.
Covers managing device passwords and security settings.
How to recover forgotten passwords using email or security questions.
Setting unlock and duress codes for enhanced security.
Steps to link the indoor station to the Hik-Connect mobile app.
Managing devices within the iVMS-4200 client software.
Steps to add video intercom devices to the client software.
Configuring system-wide parameters for video intercoms.
Making calls to indoor stations using the client software.
To Next Page
