HIKVISION KH6 Series User Manual

Restore to Default Sengs
Restore Default Sengs
Tap Restore Default Sengs to restore parameters except network parameters and
acvaon password to factory sengs. And the system will reboot automacally.
Restore All
All parameters will be restored to the factory sengs. The system will reboot to take
eect.
Device Reboot
Reboot the device.
3.2.4 Set Local
Informaon
Indoor staon No. and the indoor extension No. are numbers, which can be dialed by other devices
to call the indoor staon and the indoor extension in an intercom system. The indoor staon No., is
composed of the oor No., room No., community No., building No. and unit No.
Up to 16 indoor extensions can be set for 1 indoor
staon.
Steps
1.
Tap
Sengs → → Conguraon → to enter the indoor staon No. sengs page.
Note
Default admin password is the acvaon password.
Figure 3-13 Local Informaon
Network Indoor Staon User Manual
18

HIKVISION KH6 Series Specifications

General

Brand	HIKVISION
Model	KH6 Series
Category	Control Panel
Language	English