Control Panel User Manual
105
Before you start:
Registration on the DDNS server is required before configuring the DDNS settings
of the control panel.
Steps:
1. Enter the DDNS Settings interface:
Remote Configuration> Network > DDNS
2. Check the Enable DDNS checkbox to enable this feature.
3. Select DDNS Type.
4. Enter the Server Address of the IP Server.
5. Click Apply to save the settings.
The Server Address should be entered with the static IP address of the
computer that runs the IP Server software. For the IP Server, you have
to apply a static IP, subnet mask, and gateway and preferred DNS from
the ISP.
To Next Page
Loading...
