32
2. Click Enroll, and enter the basic information of the camera, such as IP address and port No., and
select the protocol type.
3. Enter the user name and password of the camera.
SADP Scanning
Scan all network cameras in the same LAN. A list will pop up after scanning. You can directly
check to add cameras in the list.
4. Click OK.
5. Optional: Click Edit or Delete to edit or delete the selected camera.
Link a Camera with the Zone
Steps
1. Click Device → Zone to enter the configuration page.
2. Select a zone that you wish to include video monitoring, and click .
3. Select the Link Camera.
4. Click OK.
Note
Only if the zone is linked with a network camera, the alarm email will be attached with alarm
video.
Set Video Parameters
Steps
1. Click Device → Network Camera → Video Parameters to enter the page.
To Next Page
Loading...
Need help?
General
