61
5. Optional: Perform the following operations if required.
You can tap the target user on the user list and then tap Edit Icon to
set the permissions authorized to the target user.
Note
Only the administrator can do such an operation.
If the target user is an operator, tap the target user on the user list
and then tap Linked Areas to set the area linked to the target user.
Note
Only the administrator can do such an operation.
If the target user is an administrator, an installer, or an operator, you
can tap the target user on the user list and then tap Change Keypad
Password to set the keypad password to the target user.
If the target user is an administrator or an operator, you can tap the
target user on the user list and then tap Change Duress Password to
set the duress password to the target user.
Note
If under duress, you can enter the duress code on the keyboard to
arm and disarm area(s) and upload a duress alarm.
An administrator, an installer or an operator can control the relay
module, wall switch and smart plug.
Note
● Configuration items and user permission will vary according to the user type.
● You can view linked cards/tags and keyfobs of the user but you do not have permission to
configure them.
3.2.7 Card/Tag Management
After adding cards/tags to the wireless AX HYBRID PRO, you can swipe the card/tag to arm or
To Next Page
Loading...
Need help?
General
