HIKVISION HWI-D720H-V/-Z How-To

www.hi-watch.eu
How to Add IP Camera to Non-PoE NVR
Steps:
1. Connect the devices.
2. Activate the devices and enable DHCP.
3. Go to the NVR’s website and add IPC.
Preparation
1 windows system PC,
At least 1 IP Camera,
1 Network Video Recorder,
At least 3 network cable,
1 POE Switch /non-POE Switch & compatible
power adapter for IP Camera.
Key Step 1 Connect the devices.
Steps:
1. You should connect the devices as below. And power up all the devices.
Key Step 2 Activate the devices and enable DHCP.
Steps:
1. Open SADP tool. Select an inactive device. Set the password and confirm it. Click active.

HIKVISION HWI-D720H-V/-Z Specifications

General

Model	HWI-D720H-V/-Z
Category	Security Camera
Resolution	1920 × 1080
IR Range	Up to 30 m
Wide Dynamic Range (WDR)	120 dB
Protection Level	IP67
Video Compression	H.265+/H.265/H.264+/H.264
Focal Length	2.8mm
Lens	Fixed
Day & Night	ICR
Power Supply	12 VDC ± 25%
Operating Conditions	-30 °C to 60 °C (-22 °F to 140 °F), humidity: 95% or less (non-condensing)
Image Sensor	1/2.7" Progressive Scan CMOS