HIKVISION HWN-2104MH-4P User Manual

Network Video Recorder User Manual
90
Configuring Alarm Triggered Recording
Purpose:
Follow the procedure to configure alarm triggered recording.
Enter the Alarm settings interface.
Menu> Configuration> Alarm
Alarm Settings
Click Alarm Input.
Alarm Settings- Alarm Input
1) Select Alarm Input number and configure alarm parameters.
2) Choose N.O (normally open) or N.C (normally closed) for alarm type.
3) Check the checkbox for Setting .
4) Click Settings.

HIKVISION HWN-2104MH-4P Specifications

General

Ethernet LAN	Yes
Ethernet interface type	Fast Ethernet
Ethernet LAN (RJ-45) ports	1
Supported network protocols	TCP/IP, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, UPnP
Maximum HDD capacity	6000 GB
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Video input channels	4 channels
USB 2.0 ports quantity	2
DC voltage	48 V
Power supply type	DC
Power consumption (typical)	36 W
Video compression formats	H.264, H.265

Weight and Dimensions

Weight	1000 g