HIKVISION iDS-9600NXI-I16/4F Series User Manual

1.5.2 Congure Hik-Connect
Hik-Connect provides mobile phone applicaon and plaorm service to access and manage your
video recorder, which enables you to get a convenient remote access to the surveillance system.
Steps
1. Go to System → Network → Advanced →
Plaorm Access .
2. Check Enable to acvate the funcon. Then the service terms will pop up.
1) Enter
Vericaon Code.
2) Scan the QR code to read the service terms and privacy statement.
3) Check The Hik-Connect service will require Internet access. Please read Service Terms and
Privacy Statement before enabling the service. if you agree with the service terms and
privacy statement.
4) Click OK.
Note
●
Hik-Connect is disabled by default.
●
The vericaon code is empty by default. It must contain 6 to 12 leers or numbers, and it is
case sensive.
3. Oponal: Congure following parameters.
●
Check Custom and enter Server Address as your desire.
●
Check Enable Stream
Encrypon, then vericaon code is required for remote access and live
view.
●
Check Time Sync, and the device will sync
me with Hik-Connect instead of NTP server.
4. Bind your device with a Hik-Connect account.
1) Use a smart phone to scan the QR code, and download Hik-Connect app. You can also
download it from
hps://appstore.hikvision.com , or the QR code below. Refer to Hik-
Connect Mobile Client User Manual for details.
Figure 1-15 Download Hik-Connect
2) Use Hik-Connect to scan the device QR, and bind the device.
Network Video Recorder User Manual
15

HIKVISION iDS-9600NXI-I16/4F Series Specifications

General

Brand	HIKVISION
Model	iDS-9600NXI-I16/4F Series
Category	Network Hardware
Language	English