HIKVISION iDS-TCM403-AI - Search Log; Upload Radar Debugging Information; Upgrade

Steps
Note
The funcon varies with dierent models. The actual device prevails.
1.
Go to Conguraon → System → Maintenance → Debug → Log .
2.
Check the module(s) according to your needs.
3.
Click Save.
10.2.3 Search Log
Log helps to locate and troubleshoot problems.
Steps
1.
Go to Conguraon → System → Maintenance → Log Search .
2.
Set search
condions.
3.
Click Search.
The matched log les will be displayed on the log list.
4.
Oponal: Click Export to save the log les to your computer.
10.3 Upload Radar Debugging
Informaon
You can upload the radar debugging informaon to the plaorm.
Steps
Note
The funcon varies with dierent models. The actual device prevails.
1.
Go to Conguraon → System → Maintenance → Debug → Debug .
2.
Enable Radar Debugging
Informaon Upload.
3.
Click Save.
10.4 Upgrade
Upgrade the system when you need to update the device version.
Before You Start
Prepare the upgrade
le. If the upgrade le is a compressed package, it needs to be decompressed
into the .dav format.
Steps
1.
Go to Conguraon → System → Maintenance → Upgrade & Maintenance → Upgrade .
2.
Click Browse to select the upgrade
le.
Network Trac Camera Operaon Manual
48