HIKVISION iDS-TCV907-BER User Manual

Steps
1.
Go to Conguraon → Network → Data Connecon → SDK Listening .
Figure 4-3 Set SDK Listening
2.
Enable SDK listening.
3.
Set IP Address/Domain and Port if you need to upload the alarm informaon and pictures.
4.
Oponal: The device will transmit images via the SDK listening if you enable the picture
uploading listening.
5.
Select Protocol Type.
Note
Supported funcons vary with dierent models. The actual device prevails.
License Plate Upload Protocol
Uploads arming alarm images of the license plate. You can enable Upload Binary Image if you
need to upload images which are full of black or white pixel points. Enable Output Binary
Image in BMP Format if you want to output images in this format.
Mixed Target Upload Protocol
Uploads images of
mulple targets such as humans and vehicles. You can enable the body
property to recognize clothes, bags, and other
properes.
6.
Oponal: If you want to save the alarm informaon and pictures to the cloud storage, click to
set Cloud Storage. Refer to
Set Cloud Storage for details.
7.
Click Save.
4.1.4 Set Arm Host
The device can upload the captured pictures via the arm host.
Network Trac Camera Operaon Manual
16

HIKVISION iDS-TCV907-BER Specifications

General

Brand	HIKVISION
Model	iDS-TCV907-BER
Category	Security Camera
Language	English