HIKVISION iDS-TCV907-BER - 8.3 Set Email Event

Figure 8-1 Set Email
3.
Set email parameters.
1) Enter the sender's email
informaon, including Sender, Sender's Address, SMTP Server, and
SMTP Port.
2) Select Email
Encrypon.
None
Emails are sent without encrypon.
TLS
Emails are sent aer being encrypted by TLS.
3)
Oponal: If you want to upload no-plate data, check Upload No-Plate Data.
4) Oponal: If your email server requires authencaon, check Authencaon and enter your
user name and password to log in to the server.
5) Enter the receiver's
informaon, including the receiver's name and address.
6) Oponal: Click Test to see if the funcon is well congured.
4.
Click Save.
8.3 Set Email Event
When the set event occurs, the device can be set to send an email with alarm informaon to the
user.
Network Trac Camera Operaon Manual
46