UM DS-2CCx2D9T-xxxx 022520NA (UD02874B-A) 29
Figure 16, Affix Camera to Junction Box
4. Repeat steps 6 to 9 of the
2.1.1 Ceiling Mounting
section to
complete the installation.
2.2.5. Mounting with Inclined Base of Type I Camera
You need to purchase an inclined base separately if
mounting with an inclined base.
1. Drill four screw holes in the ceiling according to the inclined
base holes.
2. Install the inclined base to the ceiling with supplied screws, as
shown below.
To Next Page
Loading...
