Network Camera User Manual
164
Note: Daily report calculates the data on the date you selected; weekly report
calculates for the week your selected date belongs to; monthly report calculates
for the month your selected date belongs to; and the annual report calculates for
the year your selected date belongs to.
2. Select the start time, and click Counting to list the heat map data.
3. Select Space Heat Map or Time Heat Map to display the results.
If you select the time heat map to list the statistics, there is an Export button to
export the data in an excel file.
Figure 14-3 Time Heat Map
Note:
It is recommended that you do not adjust the electronic lens after the installation is
completed, which may cause the inaccuracy of the data in some degree.
14.4 Counting Statistics
After you enable the counting function, you can view and download the counting data
from application tab. To get more intuitional results, you can display the data in
To Next Page
Loading...
Need help?
General
