Need help?Do you have a question about the Hillyard TRIDENT B20SC and is the answer not in the manual?
Indicates the need to consult the instruction manual for specific information.
Used to instruct the operator to read the manual before using the machine.
Requires careful reading and observation of marked sections for safety.
Indicates danger of gas exhalation and leakage of corrosive liquids.
Operator should take safety measures to avoid damage to limbs.
Indicates the danger of fire; do not go near with open flames.
Indicates packed product handling requires suitable lifting means.
Requires careful reading of sections regarding machine disposal.
Indicates the main switch or key switch for machine operation (I=on, 0=off).
Indicates the button that activates the ECO mode of the machine.
Indicates the button that commands vacuum motor operation.
Indicates the button for brush motor, vacuum motor, and solenoid valve function.
Indicates the button for engaging the reverse gear.
Indicates buttons controlling proportional solenoid valve delivery flow.
Indicates button for proportional solenoid valve delivery flow operation.
Indicates button for proportional solenoid valve delivery flow operation.
Indicates the button for automatic brush uncoupling.
Indicates the knob controlling the traction motor potentiometer.
Activates brush motor and solenoid valve.
Deactivates brush motor and solenoid valve.
Activates brush motor but not solenoid valve.
Activates vacuum motor operation.
Deactivates vacuum motor operation.
Indicates the button for automatic brush uncoupling for TRIDENT B20SC.
Indicates the knob controlling the machine's work direction.
Symbol indicating the maximum temperature of water for the solution tank.
Symbol indicating the position of the solution tank drain cap.
Symbol indicating the position of the solution tank filter.
Symbol indicating the position of the recovery tank drainage tube.
Indicates the lever for controlling detergent solution flow.
Indicates the parking brake control lever for BT versions.
Symbol indicating the maximum gradient the machine can handle.
Covers machine use by authorized personnel, surface limitations, and maintenance safety.
Guidelines for storage, usage temperature, humidity, and avoiding hazardous environments.
Instructions for receiving and unpacking the machine from its pallet packaging.
Steps for safely moving the machine, including checks before transport.
Identification of key components located on the front of the machine.
Identification of components on both the left and right sides of the machine.
Identification of key components located on the rear of the machine.
Identification and function of components on the control panel for Version B.
Identification and function of components on the control panel for Version BT.
Identification and function of components on the control panel for TRIDENT B20SC.
Information on recommended battery types, specifications, and warnings for use.
Guidelines for maintaining, recharging, and safely disposing of batteries.
Step-by-step instructions for safely handling and installing batteries into the machine.
Procedure for connecting the batteries and the main battery connector.
Steps for connecting the battery charger to the machine for models without BC.
Steps for connecting the battery charger to the machine for models with BC.
How to read and understand the battery charge level indicator for B-BT versions.
Explanation of the hour meter display and its function for B-BT versions.
Explanation of the hour meter display and its function for TRIDENT B20SC versions.
How to read and understand the battery charge level indicator for TRIDENT B20SC versions.
Instructions for adjusting the forward working speed using the electronic traction control.
Explanation of how forward speed is achieved via brush action and weight distribution.
Procedure for filling the solution tank with water and detergent, including precautions.
Step-by-step guide for assembling the squeegee unit to the machine.
Instructions for assembling the brush onto the brush head unit for B-BT versions.
Instructions for assembling the brush onto the brush head unit for TRIDENT B20SC versions.
How to prepare the machine for safe and easy transportation.
Steps to prepare the machine for work, including tank checks and switch settings.
Steps to prepare the TRIDENT B20SC for work, including switch and motor settings.
Procedure for adjusting the detergent flow rate for the B version.
Procedure for adjusting the detergent flow rate for the BT version.
Procedure for adjusting the detergent flow rate for the TRIDENT B20SC version.
How to adjust the machine's forward speed using the potentiometer.
Instructions for operating the machine in reverse for BT versions.
Information on activating and deactivating the ECO mode for reduced energy consumption.
Explanation of the overflow device for the recovery tank and its function.
Details on the overflow device in the TRIDENT B20SC recovery tank.
Procedure for safely draining and emptying the recovery tank.
Procedure for draining and emptying the recovery tank for TRIDENT B20SC versions.
Steps to properly shut down and prepare the machine after use for B-BT versions.
Steps to properly shut down and prepare the machine after use for TRIDENT B20SC versions.
Procedure for cleaning the solution tank filter and cap to ensure proper flow.
Procedure for cleaning the recovery tank filter to ensure vacuum motor function.
Instructions for cleaning the brush for effective floor cleaning in B-BT versions.
Instructions for cleaning the brush for effective floor cleaning in TRIDENT B20SC versions.
Procedure for cleaning the squeegee body to ensure better drying and vacuum motor longevity.
Procedure for cleaning the vacuum hose to ensure it is not obstructed.
Recommended weekly procedure to clean the recovery tank and prevent odours.
Recommended weekly procedure to clean the solution tank to prevent odours.
Instructions for checking and adjusting the parking brake for BT versions.
Procedure for replacing the brush on B-BT versions for optimal working capacity.
Procedure for replacing the brush on TRIDENT B20SC versions for optimal working capacity.
How to adjust the machine's direction of travel using the front knob.
Procedure for detaching and replacing the rubber parts of the squeegee body.
How to adjust the squeegee unit's tilt for optimal cleaning performance.
How to adjust the squeegee height based on rubber wear for effective drying.
Checks to perform if the machine fails to start, covering batteries and connections.
Troubleshooting steps for low water supply to the brushes, including filter checks.
Steps to diagnose and fix issues where the squeegee does not dry the floor perfectly.
Causes and solutions for the machine not cleaning effectively, including brush wear.
How to address excessive foam generation during operation, including detergent use.
Troubleshooting steps for when the vacuum cleaner system is not working.
Checks to perform if the brush motor is not functioning, including connection and ground contact.
Information on Polypropylene brushes, their use, and characteristics.
Information on Nylon brushes, their use, and characteristics.
Information on Abrasive brushes, their use, and cleaning applications.
Guidance on selecting bristle thickness based on floor type and joint depth.
Information on pad holders and types available for shiny surface cleaning.
A table detailing brush types, codes, bristles, and notes for selection.
General| Model | TRIDENT B20SC |
|---|---|
| Category | Scrubber |
| Cleaning Path | 20 inches |
| Power Source | Battery |
| Voltage | 24V |
| Machine Length | 48 inches |
| Battery Type | Lead-acid |
| Squeegee Width | 30 inches |
To Next Page
