6
Systemvoraussetzungen
• PC mit 486-, Pentium-Prozessor oder höher
• Windows 95/98/ME, Windows NT 4.0/2000/XP
• Freier Festplattenspeicher: 10 MByte
• CD-ROM-Laufwerk
• RAM: mind. 16 MByte
• Grafikauflösung: mind. 800 x 600 Bildpunkte
• Windows 95: Service Pack 1
• Windows NT: Service Pack 6 oder höher
• Tastatur und Maus
Installation des CIFs
Um eine Beschädigung des PCs und des CIFs zu ver-
meiden, entladen Sie sich am metallischen Gehäuse
des PCs.
Stellen Sie sicher, dass die konfigurierten Speicherbereiche
und Interrupte nicht von anderen Geräten belegt sind.
Um solche Fehler zu erkennen und zu verhindern,
wählen Sie unter
System Requirements
• PC with 486-, Pentium processor or higher
• Windows 95/98/ME, Windows NT 4.0/2000/XP
• Free disk space: 10 MByte
• CD ROM Drive
• RAM: min. 16 MByte
• Graphic resolution: min. 800 x 600 pixel
• Windows 95: Service Pack 1
• Windows NT: Service Pack 6 or higher
• Keyboard and Mouse
Installation of the CIF
To prevent damage to the PC or the CIF discharge
yourself at the metal cabinet of the PC.
Make sure that the configured memory areas and inter-
rupts are not used by another PC component.
In order to identify and prevent such errors, select in
Windows Pfad / Path
2000/XP Start > Systemsteuerung > Verwaltung > Computerverwaltung > System > Systeminformationen >
Hardwareressourcen
Start > Control Panel > Administrative Tools > Computer Management > System Information >
Hardware Resources
NT Start > Programme > Verwaltung > Windows-NT-Diagnose > Ressourcen
Start > Programs > Administrative Tools > Windows NT Diagnostics > Resources
95/98/ME Start > Einstellungen > Systemsteuerung > System > Gerätemanager
Start > Settings > Control Panel > System > Device Manager
ISA- und PC/104-Karten
1. Konfigurieren Sie die Startadresse des CIFs gemäß
den nachstehenden Abbildungen. Beachten Sie, dass
das CIF einen freien Speicherbereich von 2 bzw.
8 KByte zwischen 0xA0000 und 0xFFFFF benötigt.
ISA and PC/104 cards
1. Configure the start address of the CIF according the
following description. Please note that a free memory
area of 2 KByte respectively 8 KByte between 0xA0000
and 0xFFFFF is necessary.