To Next PageTo Next PageWhat to do if all 4 LEDs blink on my Hilti AG 125-A22?
If all 4 LEDs are blinking and the Hilti Grinder doesn't run, it likely means the tool has been overloaded. To resolve this, release the control switch, then press it again, and let the grinder run under no load for about 30 seconds.
General| Idle speed (max) | 9500 RPM |
|---|---|
| Cutting depth (max) | 34 mm |
| Sound pressure level | 83 dB |
| Grinding disc diameter | 125 mm |
| Vibration level (grinding) | 3.8 m/s² |
| Product color | Black, Red |
| Country of origin | China |
| Input power | - W |
| Power source | Battery |
| Battery voltage | 21.6 V |
| Battery included | Yes |
| Number of batteries included | 1 pc(s) |
| Number of shipping (inner) cases per master (outer) case | 20 pc(s) |
Weight and Dimensions| Weight | - g |
|---|---|
| Package depth | 200 mm |
| Package width | 500 mm |
| Battery weight | 100 g |
| Package height | 150 mm |
| Package weight | 500 g |
