Hilti DCH 150-SL User Manual (English)

Other manuals for Hilti DCH 150-SL

Questions and Answers:

J
Jason GriffinAug 1, 2025
How to troubleshoot a Hilti Tools power tool that won't start?
- R
  Rhonda SmithAug 1, 2025
  If your Hilti Tools power tool does not start and the service indicator is off, there might be an interruption in the electric supply. Try plugging in another electric tool or appliance to see if it works. Alternatively, the supply cord or plug could be defective. In this case, have a trained electrical specialist check and replace the cord and plug if needed. It's also possible that the on/off switch is defective, which would require repair by Hilti Service.
C
Carrie CrawfordAug 6, 2025
Why doesn't my Hilti Tools power tool achieve full power?
- R
  Rhonda Fleming DDSAug 6, 2025
  If your Hilti Tools power tool does not achieve full power and the service indicator is off, the extension cord conductors might be inadequate. Try using an extension cord with an adequate conductor cross section. Also, the power tool may have been overloaded due to excessive feed pressure. Try reducing the feed pressure.
R
robertreidAug 10, 2025
What to do if Hilti Tools power tool won't start and the service indicator is red?
- L
  Lauren WilliamsAug 10, 2025
  If your Hilti Tools power tool does not start and the service indicator shows red, it could be due to the power tool being faulty. In this case, have the power tool repaired by Hilti Service. Alternatively, the carbon brushes may be worn. Have the power tool checked by a trained electrical specialist and have the carbon brushes replaced if necessary.
A
Adam RobinsonAug 14, 2025
Why is the cutting performance of my Hilti Tools so low?
- J
  James ContrerasAug 14, 2025
  If the cutting performance of your Hilti Tools is too low, the diamond slitting discs may not be suitable for the material. Try using suitable diamond slitting discs. Also, the diamond slitting discs may be worn, so try changing them.
J
Jerry VelezAug 18, 2025
What to do if Hilti Tools power tool does not start?
- J
  Justin SandersAug 18, 2025
  If your Hilti Tools power tool doesn't start and the service indicator is off, there are several potential causes: * There may be an interruption in the electrical supply. To check this, plug in another electrical tool or appliance to the same outlet to see if it works. * The supply cord or plug could be faulty. If this is the case, have the power tool repaired by Hilti Service. * The on/off switch might be defective. In this situation, have the power tool repaired by Hilti Service.
J
josephbrownAug 22, 2025
Why is my Hilti Tools power tool not developing full power?
- C
  Christopher SanchezAug 23, 2025
  If your Hilti Tools power tool isn't developing full power and the service indicator is off, it could be due to: 1. An inadequate gauge (cross section) of the extension cord conductors. Use an extension cord with an adequate conductor cross section. 2. Overload due to excessive feed pressure. Reduce the feed pressure applied to the power tool.
E
Erin DavidsonAug 27, 2025
How to improve cutting performance of Hilti Tools?
- C
  Calvin OdonnellAug 27, 2025
  If the cutting performance of your Hilti Tools is too low, consider the following: * The diamond slitting wheels may not be suitable for the material. Use suitable diamond slitting wheels. * The diamond slitting wheels may be worn. Change the diamond slitting wheels.