24 Nederlands 2208335
*2208335*
Trouble or fault Possible cause Action to be taken
The service indicator flashes
or shows red.
Fault ▶ Refer to the information about
the service indicator. → page 18
Power tool does not start.
The service indicator is off.
Interruption in the electric supply. ▶ Plug in another electric tool or
appliance and check whether it
works.
Supply cord or plug faulty. ▶ Have the power tool repaired by
Hilti Service.
The on/off switch is defective. ▶ Have the power tool repaired by
Hilti Service.
The power tool does not de-
velop full power. The service
indicator is off.
The gauge (cross section) of the
extension cord conductors is inad-
equate.
▶ Use an extension cord with
an adequate conductor cross
section.
The power tool was overloaded
due to application of excessive
feed pressure.
▶ Reduce the feed pressure.
Cutting performance is too
low.
Diamond slitting wheels not suit-
able for the material.
▶ Usesuitablediamondslitting
wheels.
Diamond slitting wheels worn. ▶ Change the diamond slitting
wheels.
10 Disposal
Most of the materials from which Hilti products are manufactured can be recycled. The materials must be
correctly separated before they can be recycled. In many countries, your old tools, machines or appliances
can be returned to Hilti for recycling. Ask Hilti Service or your Hilti sales representative for further information.
In accordance with the European Directive on waste electrical and electronic equipment and its implemen-
tation in conformance with national law, electric tools or appliances that have reached the end of their life
must be collected separately and returned to an environmentally compatible recycling facility.
▶ Disposal of electric tools or appliances together with household waste is not permissible.
11 Manufacturer’s warranty
▶ Please contact your local Hilti representative if you have questions about the warranty conditions.
Originele handleiding
1 Informatie over documentatie
1.1 Over deze documentatie
• Lees voor ingebruikname deze documentatie door. Dit is vereist voor veilig werken en storingsvrij gebruik.
• De veiligheidsinstructies en waarschuwingsaanwijzingen in deze documentatie en op het product in acht
nemen.
• De handleiding altijd bij het apparaatbewarenenhetproductalleenmetdeze handleiding aan andere
personen doorgeven.
1.2 Verklaring van de tekens
1.2.1 Waarschuwingsaanwijzingen
Waarschuwingsaanwijzingen waarschuwen voor gevaren bij de omgang met hetproduct. Devolgende
signaalwoorden worden gebruikt:
To Previous Page
Loading...
Need help?
General
