What to do if liquid escapes from Hilti Water System pump?
If liquid escapes from the top of the Hilti Water System pump, it's likely that the valve disk is either dirty or defective. Try cleaning the valve disk. If the problem persists, it's recommended to have the unit repaired by Hilti Service.
Why does the safety valve vent too early in Hilti Water System?
If the Hilti Water System's safety valve vents too early, the safety valve is likely defective. In this case, it's recommended to have the tool repaired by Hilti Service.
What to do if the pressure gauge shows no tank pressure on Hilti Water System?
If the pressure gauge indicates no tank pressure in your Hilti Water System, the pressure gauge itself is likely defective. Have the power tool repaired by Hilti Service to resolve this issue.
How to troubleshoot Hilti Water System when it does not build up pressure?
If the Hilti Water System unit isn't building up pressure, several factors could be at play. First, ensure the pump is screwed on tightly. If it is, check the O-ring on the pump for defects, or that the sleeve is defective. If either of these parts are defective, have the power tool repaired by Hilti Service.
General| Brand | Hilti |
|---|---|
| Model | DWP 10 |
| Category | Water Pump |
| Language | English |
Read this documentation before initial operation or use for safe handling and use.
Explains symbols used in the documentation and on the product for clear understanding.
Provides critical safety guidelines for operating the product, including prohibitions and warnings.
Details the components of the water supply unit with numbered references for identification.
Specifies the product's primary function: distributing coolants and flushing liquids for specific tools.
Lists materials and conditions for which the product is not suitable to prevent hazards.
Step-by-step instructions for checking and assembling the water supply unit before use.
Instructions on connecting, actuating the ball valve, and pumping the water supply unit.
Procedures for depressurizing, cleaning, and storing the water supply unit after use.
Details regular checks, pump dismantling, greasing, and recommended maintenance intervals.
Lists common problems, their possible causes, and recommended actions for resolution.
To Next Page
