Hilti HIT-RE 500 V3 User Manual

qr.hilti.com/
manual/?id=439642
Hilti HIT-RE 500 V3
Deutsch
English
Dansk
Svenska
Norsk
Suomi
Eesti
Latviešu
Lietuvių
Polski
Čeština
Slovenčina
Magyar
Slovenščina
Русский
Български
Română
(A, B) (A, B) (A)
DANGER
Contains: 2,2’-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bisoxirane (A);
Butanedioldiglycidyl ether (A); 2-methyl-1,5-pentanediamine (B);
m-Xylylenediamine (B)
Causes severe skin burns and eye damage. (A, B); May cause an allergic skin
reaction. (A, B); May cause respiratory irritation. (B); Toxic to aquatic life with long
lasting effects. (A, B)

Hilti HIT-RE 500 V3 Specifications

General

Seismic loading	Yes
Strength class	High strength
Packaging	Foil pack
Chemical base	Epoxy resin
Temperature range	-5°C to +40°C
Cure time	24 hours at 68°F (20°C)
Base material	Concrete
Approvals / Test Reports	ETA, ICC-ES
Cleaning procedures	Please refer to the HIT-RE 500 V3 Instruction for Use
Storage and transportation temperature - min	41 °F
Storage and transportation temperature - max	77 °F
Tensile strength	Please refer to the HIT-RE 500 V3 Instruction for Use
Application	Anchoring
Safe working temperature range	41°F to 104°F (5°C to 40°C)

Summary

Hazard Information and Chemical Composition

Hazard Pictograms and Safety Warnings

Details hazard symbols, chemical components, and associated risks like skin burns and allergic reactions.

Anchor System Installation Specifications

Rebar and Anchor Dimension Tables

Curing Times and Temperature Guidelines

Curing Time Data by Temperature

Details working time and curing times (initial and full) at various temperatures, presented in both Fahrenheit and Celsius.

Application Scenarios and Curing Temperatures

Installation Procedures for Anchors

Rebar Installation Guide

Step-by-step visual guide for installing rebar anchors, including drilling, cleaning, and injection.

HIS-N Anchor Installation Guide

Visual instructions for installing HIS-N anchors, covering drilling, cleaning, and adhesive dispensing.

Dispensing Tool Application Procedures

Application Procedure A

Application Procedure B

Adhesive Application and Cleaning Process

Application Procedure C with Cleaning

Specific Installation Scenarios (6.1 & 6.2)

Installation Procedure 6.1

Installation Procedure 6.2

Additional Installation Scenarios (6.3 & 6.4)

Installation Procedure 6.3

Installation Procedure 6.4

Critical Safety Warnings and Handling Precautions

Improper Handling and Eye Protection

Warns about mortar splashes, eye damage, and mandates wearing safety glasses and gloves during handling.

Borehole Cleaning and Load Value Failure

Emphasizes dry boreholes and proper cleaning to prevent load value failures, detailing the use of Hilti accessories.

Heat Generation and Setting Instructions

Consequences of Non-Compliance

Highlights that failure to follow setting instructions can lead to fastening point failure.