What does it mean when the red LED is continuously lit with a warning tone on my Hilti Crimp tool?
If the red LED on your Hilti Crimp tool lights continuously and a warning tone is emitted, it indicates a technical problem. Incorrect operation may be possible. Contact Hilti Service.
What to do if the LED on my Hilti NCT 053-A22 is flashing red with a warning sound?
If the LED is flashing red briefly accompanied by a warning sound, it means that the battery charge is too low to complete the application. Replace the battery and charge the depleted one.
How to fix Hilti NCT 053-A22 when the battery LEDs don't show anything?
If the LEDs on the battery aren't lighting up, there could be a few reasons. First, make sure the battery is fully inserted until you hear a 'double-click'. It may also mean that the battery is discharged, so replace it and charge the empty battery. Finally, the battery might be too hot or too cold; allow it to cool down or warm up to room temperature.
Why is only 1 LED flashing on my Hilti NCT 053-A22 Tools battery?
If you see only one LED flashing on the battery, it could mean that the battery is discharged, so replace it and charge the depleted battery. Alternatively, the battery might be too hot or too cold. Allow the battery to cool down or warm up to room temperature.
What does it mean if the LED on my Hilti NCT 053-A22 Tools is briefly red without a warning sound?
If the LED lights up briefly in red without a warning sound, it indicates that the device is overheating. Allow the device to cool down.
What should I do if 4 LEDs are flashing on the Hilti NCT 053-A22 battery?
If you notice 4 LEDs flashing on the battery, it means the tool is momentarily overloaded. Allow the device to cool down.
What to do if the red LED on my Hilti Power Tool blinks and a warning tone sounds?
If the red LED blinks at short intervals and a warning tone is emitted, this indicates that the battery's charge is too low for a complete operating cycle. Replace the battery and charge the depleted one.
Why are 4 LEDs blinking on the battery of my Hilti Crimp tool?
If 4 LEDs on the battery of your Hilti Crimp tool blink, it means the product is momentarily overloaded. To resolve this, allow the product to cool down.
What to do if 1 LED on the battery blinks on Hilti Crimp tool?
If 1 LED on the battery of your Hilti Crimp tool blinks, it could be that the battery is discharged, so you should change the battery and charge the empty one. Another reason could be that the battery is either too hot or too cold, so you should allow the battery to cool down or warm up to room temperature.
Why are the LEDs not lighting up on my Hilti Crimp tool battery?
If the LEDs on the battery of your Hilti Crimp tool aren't lighting up, it could be due to a few reasons: * The battery might not be correctly inserted. Ensure it's pushed in until you hear a double click. * The battery could be discharged. Try changing the battery and charging the empty one. * The battery might be too hot or too cold. Allow it to cool down or warm up to room temperature.
To Next Page
General
