What to do if the red LED lights briefly on my Hilti Crimp tool?
If the red LED on your Hilti Crimp tool lights briefly and no warning tone sounds, it indicates the product has overheated. To resolve this, allow the product to cool down.
What does it mean if the LED on my Hilti Tools is flashing red for a long time with a warning sound?
If the LED flashes red for an extended period accompanied by a warning sound, it indicates that the pressure has not been reached due to incorrect operation. Ensure correct usage and, if necessary, check the crimp connection.
How to fix Hilti NCT 053-A22 when the battery does not lock with a 'double click' sound?
If the battery does not lock with an audible 'double click', the locking cams of the battery may be dirty. Clean the locking cams and reattach the battery.
What should I do if 4 LEDs are flashing on the Hilti NCT 053-A22 battery?
If you notice 4 LEDs flashing on the battery, it means the tool is momentarily overloaded. Allow the device to cool down.
What does it mean if the LED on my Hilti NCT 053-A22 Tools is briefly red without a warning sound?
If the LED lights up briefly in red without a warning sound, it indicates that the device is overheating. Allow the device to cool down.
Why is only 1 LED flashing on my Hilti NCT 053-A22 Tools battery?
If you see only one LED flashing on the battery, it could mean that the battery is discharged, so replace it and charge the depleted battery. Alternatively, the battery might be too hot or too cold. Allow the battery to cool down or warm up to room temperature.
How to fix Hilti NCT 053-A22 when the battery LEDs don't show anything?
If the LEDs on the battery aren't lighting up, there could be a few reasons. First, make sure the battery is fully inserted until you hear a 'double-click'. It may also mean that the battery is discharged, so replace it and charge the empty battery. Finally, the battery might be too hot or too cold; allow it to cool down or warm up to room temperature.
What to do if the LED on my Hilti NCT 053-A22 is flashing red with a warning sound?
If the LED is flashing red briefly accompanied by a warning sound, it means that the battery charge is too low to complete the application. Replace the battery and charge the depleted one.
To Next Page
General
