Hilti SFC 22-A - Page 11

*2153703*
2153703 English 7
;
Torque and drilling mode se-
lector ring
=
2-speed gear selector switch
%
Forward / reverse selector
switch with safety lock
&
Control switch (with electronic
speed control)
(
Grip
)
Lamp
+
Belt hook (optional)
§
Release buttons with addi-
tional function (charge status
display activation)
/
Charge state and fault display
(Li-ion battery)
3.2 Intended use
The product described is a hand-held cordless drill/driver. It is designed for
driving and removing screws and for drilling in steel, wood and plastic.
▶ Use only Hilti Li-ion batteries of the B18 / B22 series with this product.
▶ Use only the Hilti battery chargers of the C4/36 series for these batteries.
3.3 Charge status display
The charge status of the Liion battery is displayed after pressing the release
button.
Status Meaning
4 LEDs light up. Charge status: 75 % to 100 %
3 LEDs light up. Charge status: 50 % to 75 %
2 LEDs light up. Charge status: 25 % to 50 %
1 LED lights up. Charge status: 10 % to 25 %
1 LED blinks. Charge status: < 10 %
Battery charge status cannot be displayed while the control switch is
pressed.
3.4 Items supplied
Drill / driver, operating instructions.
• You can find other system products approved for use with your product
at your local Hilti Center or online at: www.hilti.group.
Printed: 18.09.2019 | Doc-Nr: PUB / 5293248 / 000 / 03