Hilti SFC 22-A - Preparations at the Workplace; Charging the Battery

8 English 2153703
*2153703*
4 Technical data
SFC 22A
Rated voltage
21.6 V
Weight
2.4 kg
(5.3 lb)
Speed in 1st gear
0 /min …
600 /min
Speed in 2nd gear
0 /min …
1,800 /min
Torque (max.)
28 Nm
Torque range (15 settings)
1.5 Nm …
10 Nm
4.1 Battery
Battery operating voltage
21.6 V
Ambient temperature for operation
−17 ℃ … 60 ℃
(1 ℉ … 140 ℉)
Storage temperature
−20 ℃ … 40 ℃
(−4 ℉ … 104 ℉)
Battery charging starting temperature
−10 ℃ … 45 ℃
(14 ℉ … 113 ℉)
5 Preparations at the workplace
CAUTION
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or
before changing accessories.
Observe the safety instructions and warnings in this documentation and on
the product.
5.1 Charging the battery
1. Before charging the battery, read the operating instructions for the
charger.
2. Make sure that the contacts on the battery and the contacts on the
charger are clean and dry.
3. Use an approved charger to charge the battery.
Printed: 18.09.2019 | Doc-Nr: PUB / 5293248 / 000 / 03