Why does my Hilti VC 150-6 X have no suction power?
If your Hilti Vacuum Cleaner has no suction power, it might be due to a full dust bag. Try changing the dust bag. Also, check if the filter element is clogged with dirt or dust; if so, activate the automatic filter cleaning system and let the vacuum run for 30 seconds. Another potential cause is a blocked suction hose or dust hood on the electric tool, so clean those as well.
What to do if the motor on my Hilti Vacuum Cleaner doesn't restart?
If your Hilti Vacuum Cleaner motor doesn’t restart, the mains circuit breaker might have tripped. Reset the circuit breaker. If it trips again, find the reason for the overload current. Another cause could be that the waste material container is full, so switch off the appliance and empty the container. The motor overheating protection cut-out may have been activated; switch the appliance off and let it cool down for about 5 minutes. If it still doesn’t start, return the appliance to Hilti Service. Finally, the motor might be repeatedly switched off by its thermal cut-out; carefully clean the air vents using a dry brush.
Why is dust blowing out of my Hilti Vacuum Cleaner?
If dust is being blown out of your Hilti Vacuum Cleaner, the filter element might not be fitted correctly. Refit the filter element correctly. Alternatively, the filter element could be damaged, so fit a new filter element.
Why does my Hilti Vacuum Cleaner switch itself off and on?
If your Hilti Vacuum Cleaner switches itself off or on inadvertently, or if static electricity discharges through you, the issue might be that electrostatic charge is not being conducted away because the appliance is connected to an unearthed/ungrounded power outlet. Connect the appliance to an earthed/grounded power outlet and use an antistatic suction hose.
Why doesn't the motor run on my Hilti VC 150-6 X Vacuum Cleaner when set to 'AUTO'?
If the motor doesn’t run when set to “AUTO” on your Hilti Vacuum Cleaner, the appliance may be faulty or not correctly plugged in. Make sure that the supply cord plug is fully plugged in and check that the appliance functions correctly.
Why does my Hilti Vacuum Cleaner have no or low suction power?
If your Hilti Vacuum Cleaner has no suction power or reduced suction power, it could be due to several reasons: * The dust bag may be full, so you should change it. * The filter element might be clogged with dirt or dust. If the automatic filter cleaning system is deactivated, activate it and let the vacuum cleaner run for 30 seconds. * The suction hose or dust hood on the electric tool could be blocked. Clean the suction hose and the dust hood.
What to do if the motor doesn’t restart on my Hilti VC 150-6 X?
If the motor doesn’t restart on your Hilti Vacuum Cleaner, it could be due to several reasons: 1. The mains circuit breaker may have been tripped. Reset the circuit breaker. If it trips again, find the reason for the overload current. 2. The waste material container might be full. Switch the appliance off and empty the waste material container. 3. The motor overheating protection cut-out may have been activated. Switch the appliance off and allow it to cool down for about 5 minutes. If the motor still doesn’t start, return the appliance to Hilti Service. 4. The motor may be repeatedly switched off by its thermal cut-out. Clean the air vents carefully using a dry brush.
How to fix the 'Change filter' light on my Hilti VC 150-6 X?
If the 'Change filter' service indicator lights up on your Hilti Vacuum Cleaner, it could be due to a clogged or old filter element, or because no filter element is inserted. Check the fill level in the waste material container, press the Manual cleaning operating button, and change the filter if necessary. If there is no filter element inserted, insert a suitable filter element.
Why does my Hilti VC 150-6 X shock me or turn on/off by itself?
If the Hilti Vacuum Cleaner switches itself off or on inadvertently, or if static electricity discharges through the user, the electrostatic charge is not being conducted away because the appliance is connected to an unearthed/ungrounded power outlet. Connect the appliance to an earthed/grounded power outlet and use an anti-static suction hose.
What does it mean when the water level cut-out light is on my Hilti VC 150-6 X Vacuum Cleaner?
If the 'Water level cut-out' service indicator lights up on your Hilti Vacuum Cleaner, the water level cut-out is activated. Clean the sensors and the area around the sensors with a brush.
Provides general information on the operating manual and its purpose.
Details signal words (Danger, Warning, Caution) and icons used in the documentation.
Details product symbols, prohibition symbols, and special stickers for hazard identification.
General safety warning to read all instructions to prevent electric shock, fire, or serious injury.
Guidance on staying alert, avoiding distractions, and wearing appropriate PPE during operation.
Essential guidelines for safe electrical connections, grounding, and avoiding shock hazards.
Ensures a safe working environment by focusing on lighting, tidiness, and avoiding hazardous atmospheres.
Details what materials can and cannot be vacuumed, including dust classes, hot materials, and liquids.
Provides a detailed visual overview of the vacuum cleaner components with numbered references.
Defines the product's purpose, permissible applications, and highlights actions that constitute misuse.
Explains LED indicators and the function of key operating buttons for managing the appliance.
Details how the filter cleaning system works and how to perform manual and automatic cleaning.
Lists available accessories, their material numbers, and their specific applications.
Provides key technical specifications like weight, dimensions, max. volume flow, and max. vacuum.
Safety warnings and guidelines for selecting and using extension cords with the appliance.
Step-by-step guide for initial setup, including selecting a dust bag and fitting the suction head.
Procedure for operating the vacuum cleaner when not using the integrated power outlet.
Guide for using the appliance's power outlet to operate electric tools, including safety checks.
Advice on selecting the correct dust bag for dry materials and safe disposal.
Instructions for safely vacuuming liquids, including filter requirements and container cleaning.
Procedures for emptying containers, cleaning the appliance, and storing it after use.
Recommends methods for cleaning filter elements and guides on when and how to replace them.
Steps to check the container level monitoring system and other components after maintenance.
Instructions for safely transporting and storing the vacuum cleaner in a secure location.
Lists common malfunctions of the vacuum cleaner and provides corresponding actions to resolve them.
Lists common malfunctions of the vacuum cleaner and provides corresponding actions to resolve them.
Describes error messages from connected system devices and how to check the vacuum cleaner for issues.
General| Vacuum Pressure | 210 mbar |
|---|---|
| Container Volume | 6 l |
| Weight | 8.1 kg |
| Max. vacuum | 210 mbar |
| Hose length | 2.5 m |
| Voltage | 230 V |
| Vacuum | 210 mbar |
| Cable Length | 7.5 m |
| Power | 1500 W |
| Airflow | 150 l/s |
| Power input | 1500 W |
To Next Page
