Why does my Hilti VC 150-6 XE Vacuum Cleaner have no suction power?
If your Hilti Vacuum Cleaner has no suction power, it might be due to a full dust bag. Try changing the dust bag. Also, check if the filter element is clogged with dirt or dust; if so, activate the automatic filter cleaning system and let the vacuum run for 30 seconds. Another potential cause is a blocked suction hose or dust hood on the electric tool, so clean those as well.
What to do if the motor on my Hilti VC 150-6 XE doesn't restart?
If your Hilti Vacuum Cleaner motor doesn’t restart, the mains circuit breaker might have tripped. Reset the circuit breaker. If it trips again, find the reason for the overload current. Another cause could be that the waste material container is full, so switch off the appliance and empty the container. The motor overheating protection cut-out may have been activated; switch the appliance off and let it cool down for about 5 minutes. If it still doesn’t start, return the appliance to Hilti Service. Finally, the motor might be repeatedly switched off by its thermal cut-out; carefully clean the air vents using a dry brush.
Why is dust blowing out of my Hilti VC 150-6 XE?
If dust is being blown out of your Hilti Vacuum Cleaner, the filter element might not be fitted correctly. Refit the filter element correctly. Alternatively, the filter element could be damaged, so fit a new filter element.
Why does my Hilti VC 150-6 XE Vacuum Cleaner switch itself off and on?
If your Hilti Vacuum Cleaner switches itself off or on inadvertently, or if static electricity discharges through you, the issue might be that electrostatic charge is not being conducted away because the appliance is connected to an unearthed/ungrounded power outlet. Connect the appliance to an earthed/grounded power outlet and use an antistatic suction hose.
Why doesn't the motor run on my Hilti Vacuum Cleaner when set to 'AUTO'?
If the motor doesn’t run when set to “AUTO” on your Hilti Vacuum Cleaner, the appliance may be faulty or not correctly plugged in. Make sure that the supply cord plug is fully plugged in and check that the appliance functions correctly.
Why does my Hilti Vacuum Cleaner have no or low suction power?
If your Hilti Vacuum Cleaner has no suction power or reduced suction power, it could be due to several reasons: * The dust bag may be full, so you should change it. * The filter element might be clogged with dirt or dust. If the automatic filter cleaning system is deactivated, activate it and let the vacuum cleaner run for 30 seconds. * The suction hose or dust hood on the electric tool could be blocked. Clean the suction hose and the dust hood.
What to do if the motor doesn’t restart on my Hilti VC 150-6 XE?
If the motor doesn’t restart on your Hilti Vacuum Cleaner, it could be due to several reasons: 1. The mains circuit breaker may have been tripped. Reset the circuit breaker. If it trips again, find the reason for the overload current. 2. The waste material container might be full. Switch the appliance off and empty the waste material container. 3. The motor overheating protection cut-out may have been activated. Switch the appliance off and allow it to cool down for about 5 minutes. If the motor still doesn’t start, return the appliance to Hilti Service. 4. The motor may be repeatedly switched off by its thermal cut-out. Clean the air vents carefully using a dry brush.
How to fix the 'Change filter' light on my Hilti Vacuum Cleaner?
If the 'Change filter' service indicator lights up on your Hilti Vacuum Cleaner, it could be due to a clogged or old filter element, or because no filter element is inserted. Check the fill level in the waste material container, press the Manual cleaning operating button, and change the filter if necessary. If there is no filter element inserted, insert a suitable filter element.
Why does my Hilti VC 150-6 XE shock me or turn on/off by itself?
If the Hilti Vacuum Cleaner switches itself off or on inadvertently, or if static electricity discharges through the user, the electrostatic charge is not being conducted away because the appliance is connected to an unearthed/ungrounded power outlet. Connect the appliance to an earthed/grounded power outlet and use an anti-static suction hose.
What does it mean when the water level cut-out light is on my Hilti Vacuum Cleaner?
If the 'Water level cut-out' service indicator lights up on your Hilti Vacuum Cleaner, the water level cut-out is activated. Clean the sensors and the area around the sensors with a brush.
General| Brand | Hilti |
|---|---|
| Model | VC 150-6 XE |
| Category | Vacuum Cleaner |
| Language | English |
To Next Page
