Hiltron security PROTEC4GSM - A B -12 V+ +Int Gnd 24 H; Gnd Z1 Z2 Z3 Z4 Gnd Z5 Gnd; Z5 Z6 Z7 Z8; Addresse 8

2.4.6 Connection of the console Dx22
WARNING:
On this central computer, the input IN and the output OUT of the console DX22 are not used.
The ID of the console must be regulated at 08, otherwise it will be displayed the writing:
UNADDRESSED CONSOLE
In order to readdress the console at 08 you have to:
-Power the console
-Press the button for 4 seconds to start the main manu
-Choose the menu address and confirm with
-Select address 08 and press
-Confirm the changes with the button
ESC
CONSOLE
ADDRESSE 8
DX22
BInOut A +
-
JX1
JX2
JX1
JX2
JX1
JX2
-
JX1x1 JX1x2 JX1x3 JX1x4 JX1x5 JX1x6 JX1x7 JX1x8 JX1x9
JX1x10
JX1x11 JX1x12 JX1x13 JX1x14 JX1x15 JX1x16 JX1x17 JX1x18 JX1x19 JX1x20 JX1x21 JX1x22 JX1x23 JX1x24 JX1x25 JX1x26 JX1x27 JX1x28 JX1x29 JX1x30
JX2x1 JX2x2 JX2x3 JX2x4 JX2x5 JX2x6 JX2x7 JX2x8 JX2x9
JX2x10
JX2x11 JX2x12 JX2x13 JX2x14 JX2x15 JX2x16 JX2x17 JX2x18 JX2x19 JX2x20 JX2x21 JX2x22 JX2x23 JX2x24 JX2x25 JX2x26 JX2x27 JX2x28 JX2x29 JX2x30
SIR +12v
Manutenzione
Centrale
SIR
GND
S.A
V
R
KEY
A
B -12V+ +INT GND 24H GND Z1 Z2 Z3 Z4 Z5GND
1
2
CX1
NOTE: The transceiver DXR2
must be inserted with
the components
face-down.
DXR2
Z8
Z5 Z6 Z7
2.4.5 Connecting key readers DX200/DX300
NOTA
PROTEC4GSM and PROTEC8GSM manageo until 4 readers that must beconfigured invidually
through dip-switch .
Make sure not to use the same address on more devices.WARNING: WARNING:
Installation
security
PROTEC4GSM - PROTEC8GSM - Installation guide and use
security
1312
DXR2
JX1
JX2
JX1
JX2
JX1
JX2
-
JX1x1 JX1x2 JX1x3 JX1x4 JX1x5 JX1x6 JX1x7 JX1x8 JX1x9
JX1x10
JX1x11 JX1x12 JX1x13 JX1x14 JX1x15 JX1x16 JX1x17 JX1x18 JX1x19 JX1x20 JX1x21 JX1x22 JX1x23 JX1x24 JX1x25 JX1x26 JX1x27 JX1x28 JX1x29 JX1x30
JX2x1 JX2x2 JX2x3 JX2x4 JX2x5 JX2x6 JX2x7 JX2x8 JX2x9
JX2x10
JX2x11 JX2x12 JX2x13 JX2x14 JX2x15 JX2x16 JX2x17 JX2x18 JX2x19 JX2x20 JX2x21 JX2x22 JX2x23 JX2x24 JX2x25 JX2x26 JX2x27 JX2x28 JX2x29 JX2x30
SIR +12v
Manutenzione
Centrale
A
B -12V+ +INT GND 24H GND Z1 Z2 Z3 Z4 Z5GND
ADDRESSE 17
ADDRESSE 16
ADDRESSE 18
1 2
-
+
A B
3
4
ADDRESSE 19
DX300
Add. 16
Reader 1
ON
Add. 17
Reader 2
ON
Ind. 18
Reader 3
ON
Add. 18
Add. 19
Reader 4
Ind. 18
ON
CX1
NOTE:The devices
PROTEC4GSM
and PROTEC8GSM
can manage until 4 readers
that have to be
configured singularly
through the dip-switches.
SIR
GND
S.A
V
R
KEY
1 2
-
+
A B
3
4
DX300
GND
Z8
Z5 Z6 Z7
Make sure not to
use the
same address
on more devices.
WARNINGWARNING
1 2
3
4
-
+
A
B
DX200
1 2
3
4
-
+
A
B
DX200