Need help?Do you have a question about the Hiltron security PROTEC4GSM and is the answer not in the manual?
Lists the main capabilities and functionalities of the PROTEC4GSM/PROTEC8GSM system.
Details specifications like absorption, voltage, dimensions, and certifications for the devices.
Covers general instructions, power supply, and tamper installation guidelines.
Details connecting the EASY-CONNECT board, detectors, sirens, and radio receivers.
Connects consoles, key readers, electronic keys, and the console board/CPU for system setup.
How to access menus, manage telephone book, and configure basic setup options.
Covers writing/reading keys, generating codes, and setting entrance/exit timings.
Configures alarms, zone types, partialization, GSM module, and bus devices.
Viewing system info, firmware, IMEI, and performing resets or test calls.
Accessing command menus, modifying user codes, and excluding zones from monitoring.
Procedures for system arming, deactivation, activation exit, and output control.
How to access the voice menu locally and remotely, and understand voice prompts.
Using voice commands for system control like listening, output activation, and insertion.
Central unit panel description, LEDs, microphone, keypad, and GSM status reports.
Interpreting system statuses, zone types, memory, and device operations.
Executing system insertion, disconnection, alarm stops, and zone operations.
General| Brand | Hiltron security |
|---|---|
| Model | PROTEC4GSM |
| Category | Security Sensors |
| Language | English |
To Next Page
