Hiltron security PROTEC5X - 4 Operating; 4.1 Front panel description

42 43
OperatingPROTEC5X - User’s manual
4 Operating
4.1 Front panel description
4 53
1 2
Green LED - System status control
LED on system disabled
LED blinking during the exiting time
LED flashing system enabled
Red LED - Zone status control
On system disabled and during the exiting time:
LED on one or more opened zones
LED blinking one or more excluded zones
On system enabled:
LED blinking alarm memory
Red LEDs - Zone 1, zone 2, zone 3 status control
LED on zone opened
LED off zone closed
LED blinking zone excluded
Zones exclusion/inclusion buttons
On system disabled, it is possible to exclude a zone
pressing the relative zone button; the LED
corresponding to the zone excluded starts flashing.
Pressing again the button the zone is included and the
LED stops with flashing.
Note: if the zone is opened, the LED will be turned on,
and the flash will be reversed, that is the flash will turn
off the LED for a moment.
Red LED - Zone 24h status control
LED on zone opened
LED off zone closed
LED blinking zone autoexcluded
Alarm Memory / Autoinhibited Zones visualization
button
On system disabled, pressing this button, the status
control LEDs indicate:
LED on zone autoinhibited
LED blinking zone that caused the alarm
(Alarm Memory)
Yellow LED - Power supply status control
LED on power supply OK
LED blinking overloaded power supply
Red LED - Fuses status control
LED on fuses OK
LED blinking at least one fuse interrupted
Green LED - Main power supply status control
LED on main power supply present
LED blinking main power supply absent
10
11
12
13
1
2
3
4
5
6
7
8
9
oN
main power
fuse
power supply
exclusion
openeddisarmed
system zone
lamp.lamp.
EXIT
ACCESS
alarm
memory
flashflash
arm
zonesystem
exclused
allarme
memoria
alarm
memory
ZONE CONTROL
green red
led
acceso
led
impianto zone
disinserito aperte
uscita
entrata
allarme
memoria
impianto zone
inserito escluse
verde rosso
oN
main power
fuse
power supply
exclusion
openeddisarmed
system zone
lamp.lamp.
EXIT
ACCESS
alarm
memory
flashflash
arm
zonesystem
exclused
allarme
memoria
alarm
memory
ZONE CONTROL
green red
led
acceso
led
impianto zone
disinserito aperte
uscita
entrata
allarme
memoria
impianto zone
inserito escluse
verde rosso
12V
Int 24h
A B
C
D
RIT IMM COM.IMM2
COM. SIR. S.A.
9
10
11
12
13
6
7
8
3.8 Alarm system abilitation in absence of net
This option is for the activation of a series of alarm of few second after 5 hours of absence
Of the net..
! Disconnecting the system..
! Pressing the PROGRAM key up to the flashing of LEDs .
! Pressing the key for enable/disable the option.
! The flashing of LED will point out the abilitation of the function.
! Pressing three consecutive times the key to log out of the programming.
1
3 4 5
8
1
2
7
6
4 53
oN
main power
fuse
power supply
exclusion
openeddisarmed
system zone
lamp.lamp.
EXIT
ACCESS
alarm
memory
flashflash
arm
zonesystem
exclused
allarme
memoria
alarm
memory
ZONE CONTROL
green red
led
acceso
led
impianto zone
disinserito aperte
uscita
entrata
allarme
memoria
impianto zone
inserito escluse
verde rosso
oN
main power
fuse
power supply
exclusion
openeddisarmed
system zone
lamp.lamp.
EXIT
ACCESS
alarm
memory
flashflash
arm
zonesystem
exclused
allarme
memoria
alarm
memory
ZONE CONTROL
green red
led
acceso
led
impianto zone
disinserito aperte
uscita
entrata
allarme
memoria
impianto zone
inserito escluse
verde rosso
12V
Int 24h
A B
C
D
RIT IMM COM.IMM2
COM. SIR. S.A.
5X
PROTEC
5X
PROTEC
security security