Himiway A7 PRO - Battery Charging

◆ Charging Procedure for Off-bike Charging
Find the keys located on the handlebar (fig. 3) and remove them. If you cut them
from the handlebars, be careful not to damage any of the wires.
Step 1:
Figure 3
Figure 4
Step 2:
NOTICE: Please keep your key and its spare in a safe place. Once lost, they are
difficult to copy. The key number correlates to the number on the keyhole (fig. 4).
If you have lost the keys, you can give us the key number to get new keys.
14
Remove the rubber cover on the charging socket and insert the DC plug (Plug 2)
of the charger into the battery charging socket (fig. 2).
Connect the power plug (110V-240V plug) to the power socket.
Step 3:
Step 4:
Battery Charging
◆ Charging Procedure for On-bike Charging
Check the battery power indicator on your display.
Assemble the charger as shown in Figure 1 by inserting the plug (Plug 1) into the
transformer.
Step 1:
Step 2:
Figure 1 Figure 2
NOTICE: This order helps extend the battery life and effectively reduces battery
damage caused by improper charging.
Plug 2
Plug 3 Plug 2
Plug 1
Use the key to unlock the battery (see Fig. 5). Insert the key into the battery lock
hole and turn the key clockwise ( about 170°) until you hear a click and the
battery pops out. Continue to turn the key until you hear another click, which
means the battery is fully released and can be taken out.
To remove the key, turn it counterclockwise back to its original position before
you
remove the key.
To install the battery, insert the key and turn it clockwise until you hear a click.
Align the bottom groove of the battery with the protrusion of the lower holder
assembly.
Continue to press the upper end.
Until you hear a click, indicating that the battery is fully installed.
To remove the key, turn it counterclockwise back to its original position before
you remove the key.
Remember to always turn the key back to its original position before removing it.
NOTICE: Make sure the waterproof plug of the charging port is closed before
riding.
Do not ride the bike with the key inserted.
Figure 3
Figure 4
Step 2: