Rider weight (KG)
< 55
55 - 65
65 - 75
75 - 85
85 - 95
95 <
Air pressure (factory setting)
Max. pressure
X1-BOOST
40 - 55
55 - 65
65 - 75
75 - 85
85 - 100
100+
110 psi
120 psi
17
◆ Adjust the Air Pressure
Adjustment of the front fork
By adding compression, riders can firm up the suspension to stay higher in its travel
and offer a more supported ride. Less compression offers a plusher or softer
suspension feel.
In this mode, the Himiway will perform like a normal bike, as you’ll be riding without any
assistance from the motor. This mode is especially useful if you run out of battery, or are
looking for more intensive resistance training.
We suggest that you select a lower assistance level when you first ride your Himiway
Bike. After becoming more comfortable with the riding characteristics of our e-bike, and
more familiar with the varying range requirements of your most common destinations
and commuting routes, you can then make any needed adjustments to pedal assist
settings, as well as riding position, etc.
◆ Pedal-only
NOTICE: Shift gears regularly for optimal cadence and downshift before stopping
the bike. Before shifting gears, reduce the force of your pedal strokes to avoid
premature wear.
Riding Modes
Pedal-Assist is an operating mode on e-bikes designed to engage the motor to assist,
but not replace, your own pedaling effort. When you are operating your bike in the pedal
assist mode, you can adjust the setting according to your personal preference. Himiway
A7 Pro has nine levels pedal assist settings - ranging from 0 to 5.
Moreover, lower settings can extend usable range for longer rides, maximizing
enjoyment while minimizing physical stress and fatigue.
◆ Pedal-assist
Unscrew the cap and inflate using a professional inflation tool. The following table
provides suggested pressure values based on weight. We strongly advise seeking
guidance from a professional.
To Next Page
Loading...
